Adande VCS - Location and Stability

5.7 Location and Stability
It is important that the Adande
®
unit is installed and maintained on a flat, clean and level
surface to ensure correct operation.
The room should be dry and sufficiently ventilated.
Optimum performance is obtained at ambient temperatures between +16ºC (60ºF) and
+38ºC (100ºF).
Ensure that no obstructions are placed directly in front of the air outlet grille.
The Adande
®
drawer unit can be mounted on rubber feet, rollers or castors. When
mounted on a castor base, the front two castors should have their brakes ON during
normal use as in figure 4.
Figure 4: Lockable Castor
If the Adande
®
unit is mounted on two rollers at the rear of the unit, and rubber feet at the
front, to move the unit, lift the front of the unit as in figure 5 and push or pull the unit into
position.
Figure 5: Lifting unit to move when on rollers and feet
THE UNIT SHOULD BE UNLOADED BEFORE MOVING
ADE- 2015-B Page 9