Chapter 6: Installing the Driver and an Operating System ● 30
5 If necessary, press the Delete key to remove the default SCSI driver.
6 Press Insert to add another driver.
The available drivers are displayed.
7 Insert the driver floppy disk.
8 Press the Insert key, then press Enter to scan the floppy disk drive.
9 Once the driver is selected, the new Device Driver is displayed.
10 Select Return to Driver Summary, then press Enter.
11 From the lower window menu, select Continue, then press Enter.
12 Follow the instructions in the NetWare manual to complete the installation.
To Next Page
Loading...
