9
Troubleshooting
■
Input/Output Address (I/O)
■
Direct Memory Access (DMA)
■
Memory
6
The setting, and the hardware using the setting, are displayed.
■
If a specific resource is not listed, the resource is not used
by a device.
■
If a resource is listed more than once, the resource is used
by more than one device.
■
If a resource is used by an unknown device, the resource is
used but the device using the resource cannot be detected.
(This condition is most common.)
7
Click cancel to close the windows, then close Control Panel.
How do I use the Hardware Conflict Troubleshooter in Windows 95/98?
1
Click the Start button, then click Help.
2
From the Contents tab, double-click Troubleshooting. (In
Windows 98, click Troubleshooting and then click Windows
98 Troubleshooting.)
3
Double-click if you have a hardware conflict.
4
Follow the step-by-step instructions in Windows Help.
To Next Page
Loading...
