Adaptec ULTRA160 - Page 24

17
Configuring the Adaptec SCSI Card 29160 with SCSISelect
Enable Disconnection Yes, No Yes (Enabled)
Send Start Unit Command Yes, No Yes (Enabled)
Enable Write Back Cache
2
N/C (No Change)
Yes, No
N/C (No Change)
BIOS Multiple LUN Support
2
Yes, No No (Disabled)
Include in BIOS Scan
2
Yes, No Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Display <Ctrl> <A> Messages during BIOS Ini-
tialization
Enabled, Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
Enabled, Disabled Enabled
Verbose/Silent Mode Verbose, Silent Verbose
Host Adapter BIOS Enabled
Disabled: Not Scan
Disabled: Scan Bus
Enabled
Domain Validation
2
Enabled, Disabled Enabled
Support Removable Disks Under BIOS as
Fixed Disks
2
Disabled, Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM
2
Enabled, Disabled Enabled
BIOS Support for Int 13 Extensions
2
Enabled, Disabled Enabled
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
SCSI
Select
Options Available Settings Default Setting