Need help?Do you have a question about the ADB ALC4-2 and is the answer not in the manual?
General| Brand | ADB |
|---|---|
| Model | ALC4-2 |
| Category | Light Fixture |
| Language | English |
Read instructions carefully. Check equipment upon delivery for any damage.
Ensure cables and connections are in good condition. Always pull plugs, never cables.
Luminaire designed for 120-240V. Ensure earth wire (yellow-green) is always connected.
Direct exposure to LED light without diffuser is dangerous for eyes.
Identifies LED modules, LCD display, and navigation buttons.
Details the PowerCon power input and DMX In/Through connectors.
Steps for attaching the luminaire to a lighting bar using a clamp and safety cable.
Procedure for loosening the locking lever and aiming the luminaire.
Slide accessory into grooves, fix with screws, and secure with safety cable.
Connects the mains cable using the PowerCon connector to the Power In input.
Connects a female XLR5 cable to the DMX In input for DMX control.
Describes how to connect multiple luminaires in series for power and data.
Press [Esc] to activate menus; use [▲]/[▼] to scroll, [] to select.
Press [Esc] repeatedly until the display backlight switches off.
All LED modules share same light output (color & intensity).
Allows independent control of each LED module for effects.
Independent control of modules, with Channel 1 as master intensity.
All DMX channels are controlled with 8-bit resolution.
Explains priority between CT and RGB parameters based on DMX value.
Lists the seven recorded color temperature levels and two operating modes.
Instructions for replacing the fuse with the correct type and rating.
Emphasizes using only original ADB spare parts for performance and reliability.
How to clean the fan and heat sink slots to prevent 'FAN ERROR'.
Cleaning instructions for luminous surfaces and metal parts.
Details symmetrical, asymmetrical, and barndoor/coupe-flux reflectors.
Specifies the 2m mains connection cable for linking units.
Lists hook clamp sizes and safety cable options.
Details source, power, light output (White/RGB), and color rendering index.
Provides axial intensity (cd) and beam/field angles for different reflector configurations.
Shows the basic dimensions of the ALC4-2 luminaire.
Shows dimensions with the asymmetric reflector attached.
Shows dimensions with the symmetric reflector attached.
Shows rotation angles for the luminaire with an asymmetric reflector.
Shows rotation angles for the luminaire with a symmetric reflector.
Shows rotation angles for the luminaire with a barn door.
To Next Page