To Next PageTo Next PageWhat to do if PWR FAUL UAIT error message appears on ADC EcoWash Washer after a power cut?
If you see the PWR FAUL UAIT error message on your ADC EcoWash Washer after a power cut, you can either press START to continue the program from where it left off, or press ESC to end the program.
What to do if E4 FAULT WATER INLET error message appears on ADC EcoWash EWR-30 MR Washer?
If the E4 FAULT WATER INLET error message appears, you can press START to continue the program or press ESC to end it.
What to do if E3 FAULT DRAIN PIPE error message appears on ADC EcoWash EWR-30 MR Washer?
If the E3 FAULT DRAIN PIPE error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E5 HEATING FAULT error message appears on ADC EcoWash Washer?
If the E5 HEATING FAULT error message appears, you can press START to continue the program or press ESC to end it.
What to do if E6 MAX. TEMP error message appears on ADC EcoWash EWR-30 MR?
If the E6 MAX. TEMP error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E7 THERMOSTAT OPEN error message appears on ADC EcoWash EWR-30 MR?
If the E7 THERMOSTAT OPEN error message appears, you can press START to continue the program or press ESC to end it.
What to do if E9 MOTOR HEATING error message appears on ADC EcoWash Washer?
If the E9 MOTOR HEATING error message appears, you can press START to continue the program or press ESC to end it.
What to do if E2 FAULT LOCK error message appears on ADC EcoWash EWR-30 MR?
If you see the E2 FAULT LOCK error message on your ADC EcoWash Washer, press ESC to end the program.
What to do if E10 UNBALANCE error message appears on ADC EcoWash EWR-30 MR?
If the E10 UNBALANCE error message appears on the ADC EcoWash Washer, press ESC to end the program.
What to do if E11 CLOTHES HOT error message appears on ADC EcoWash Washer?
If the E11 CLOTHES HOT error message appears on the ADC EcoWash Washer, press ESC to end the program.
Critical safety warnings and detailed precautions for safe appliance operation.
Details on the available wash programs (P1-P7) and their specific uses.
Steps for running a program and methods for program completion in OPL mode.
Steps to resolve common electrical, mechanical, and operational issues.
Explanations of specific error messages and the procedures to clear them.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWR-30 MR |
| Category | Washer |
| Language | English |
