To Next PageTo Next PageWhat to do if PWR FAUL UAIT error message appears on ADC EcoWash Washer after a power cut?
If you see the PWR FAUL UAIT error message on your ADC EcoWash Washer after a power cut, you can either press START to continue the program from where it left off, or press ESC to end the program.
What to do if E4 FAULT WATER INLET error message appears on ADC EcoWash EWS-40 MC?
If the E4 FAULT WATER INLET error message appears, you can press START to continue the program or press ESC to end it.
What to do if E3 FAULT DRAIN PIPE error message appears on ADC EcoWash Washer?
If the E3 FAULT DRAIN PIPE error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E5 HEATING FAULT error message appears on ADC EcoWash Washer?
If the E5 HEATING FAULT error message appears, you can press START to continue the program or press ESC to end it.
What to do if E6 MAX. TEMP error message appears on ADC EcoWash EWS-40 MC?
If the E6 MAX. TEMP error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E7 THERMOSTAT OPEN error message appears on ADC EcoWash Washer?
If the E7 THERMOSTAT OPEN error message appears, you can press START to continue the program or press ESC to end it.
What to do if E9 MOTOR HEATING error message appears on ADC EcoWash Washer?
If the E9 MOTOR HEATING error message appears, you can press START to continue the program or press ESC to end it.
What to do if E2 FAULT LOCK error message appears on ADC EcoWash EWS-40 MC?
If you see the E2 FAULT LOCK error message on your ADC EcoWash Washer, press ESC to end the program.
What to do if E10 UNBALANCE error message appears on ADC EcoWash EWS-40 MC Washer?
If the E10 UNBALANCE error message appears on the ADC EcoWash Washer, press ESC to end the program.
What to do if E11 CLOTHES HOT error message appears on ADC EcoWash EWS-40 MC Washer?
If the E11 CLOTHES HOT error message appears on the ADC EcoWash Washer, press ESC to end the program.
Explains the screen, keys, and indicators for machine operation.
Lists available wash programs (P1-P7) and their basic remarks.
Diagrams and descriptions of OPL mode controls and indicators.
General machine operation, loading, and program control features, including running and ending programs.
Diagrams and descriptions of coin mode payment controls and indicators.
Machine configuration for self-service, activated programs, and general operation.
Steps for using pay centre or card payment systems.
Steps for using the coin slot payment system.
Details on OPL, Coin, and CP operating modes.
Accessing and using the configuration menu for settings.
Accessing and using the maintenance menu for technical checks.
Checks for common electrical and mechanical issues.
Explains warning and fault messages displayed on the screen.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWS-40 MC |
| Category | Washer |
| Language | English |
