What to do if PWR FAUL UAIT error message appears on ADC EcoWash EWH-60 MC Washer after a power cut?
If you see the PWR FAUL UAIT error message on your ADC EcoWash Washer after a power cut, you can either press START to continue the program from where it left off, or press ESC to end the program.
What to do if E4 FAULT WATER INLET error message appears on ADC EcoWash EWH-60 MC Washer?
If the E4 FAULT WATER INLET error message appears, you can press START to continue the program or press ESC to end it.
What to do if E3 FAULT DRAIN PIPE error message appears on ADC EcoWash Washer?
If the E3 FAULT DRAIN PIPE error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E5 HEATING FAULT error message appears on ADC EcoWash EWH-60 MC?
If the E5 HEATING FAULT error message appears, you can press START to continue the program or press ESC to end it.
What to do if E6 MAX. TEMP error message appears on ADC EcoWash EWH-60 MC?
If the E6 MAX. TEMP error message appears, you can press START to continue the program, or press ESC to end the program.
What to do if E7 THERMOSTAT OPEN error message appears on ADC EcoWash EWH-60 MC Washer?
If the E7 THERMOSTAT OPEN error message appears, you can press START to continue the program or press ESC to end it.
What to do if E9 MOTOR HEATING error message appears on ADC EcoWash EWH-60 MC?
If the E9 MOTOR HEATING error message appears, you can press START to continue the program or press ESC to end it.
What to do if E2 FAULT LOCK error message appears on ADC EcoWash EWH-60 MC Washer?
If you see the E2 FAULT LOCK error message on your ADC EcoWash Washer, press ESC to end the program.
What to do if E10 UNBALANCE error message appears on ADC EcoWash Washer?
If the E10 UNBALANCE error message appears on the ADC EcoWash Washer, press ESC to end the program.
What to do if E11 CLOTHES HOT error message appears on ADC EcoWash EWH-60 MC?
If the E11 CLOTHES HOT error message appears on the ADC EcoWash Washer, press ESC to end the program.
Crucial safety information and precautions for users.
Details the different controls on the machine's interface.
Lists and describes the available wash programs.
Details the OPL operating mode for full machine access.
Describes the Coin Mode for self-service operation.
Explains the CP Mode for pay station or card operation.
Allows setting prices for individual programs in Coin Mode.
Troubleshooting common electrical and mechanical issues.
Lists and explains error messages displayed on the machine.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWH-60 MC |
| Category | Washer |
| Language | English |
To Next Page
