18 American Dryer Corporation 450216-3
Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100105 1 4L-520 V-Belt (to idler bearing assembly)
2 101131 1 1/2” x 2-1/4” Motor Pulley (for use on 1Ø 60 Hz models Only)
3 150501 4 5/16-18 x 3/4” Tap Bolt
4 153002 4 5/16” Lock Washer
5 153001 4 5/16” Flat Washer
6 181049 1 1/2 HP 115-230v 1Ø 60 Hz Motor with Plug
7 122701 8 Socket Terminal ONLY
8 137030 1 8-Pin Housing Connector ONLY
122801 1 Pin / Socket Extraction Tool
9 152004 4 5/16-18 Hex Nut
10 153002 4 5/16” Lock Washer
11 153001 4 5/16” Flat Washer
12 117600 4 Noise Suppressor Tape (sold by the foot)
13 154000 4 5/16-18 Tinnerman Nut
14 850016 1 1/2 HP Motor Mount ONLY (56Z frame)
803871 1 1/2 HP 115-230v 1Ø 60 Hz Motor Mount Assembly with Plug Motor
(includes illus. nos. 2 through 6 and 12 through 19)
15 153050 2 1/2” S.A.E. Flat Washer
16 100604 1 12-1/2” Impellor (fan) with 1/2” Bore
17 100702 1 1/8” x 1/8” x 1-1/2” Key
18 153050 2 1/2” S.A.E. Flat Washer
19 152006 2 1/2-20 Left Hand Jam Nut
To Next Page
Loading...
