ADC AD-35i - AD-50 I; M-50 P Specifications

8 American Dryer Corp. WFR113539 -13
MAXIMUM CAPACITY (DRY WEIGHT) 50 lb
22.67 kg
TUMBLER DIAMETER 32-3/4”
83.18 cm
TUMBLER DEPTH 37-1/2”
95.25 cm
TUMBLER VOLUME 18.3 cu ft
518.19 L
TUMBLER / DRIVE MOTOR 1 hp
0.75 kW
BLOWER / FAN MOTOR* 3/4 hp
0.56 kW
CABINET WIDTH 34-1/2”
87.63 cm
CABINET DEPTH 49-3/8”
125.41 cm
CABINET HEIGHT 73-5/8”
187.1 cm
DOOR OPENING (DIAMETER) 27”
68.58 cm
DOOR SILL HEIGHT 29-1/8”
74 cm
WATER CONNECTION 3/4”-11.5 NH
(North America)
3/4” B.S.P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER 10 / 20
DRYERS PER 48’/53’ TRUCK 25 / 28
AIRBORNE SOUND LEVEL 64 dB(A)
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 655 lb
297.10 kg
APPROXIMATE SHIPPING WEIGHT 710 lb
322.05 kg
AIRFLOW
50 Hz
810 cfm
22.93 cmm
60 Hz
850 cfm
24.06 cmm
HEAT INPUT 125,000 Btu/hr
31,500 kcal/hr
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
INLET PIPE CONNECTION
1/2” N.P.T.
1/2” B.S.P.T.
(Female) (CE and Australia Only)
VOLTAGE AVAILABLE 208-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 660 lb
299.37 kg
APPROXIMATE SHIPPING WEIGHT 715 lb
324.31 kg
AIRFLOW
50 Hz
714 cfm
20.21 cmm
60 Hz
746 cfm
21.12 cmm
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
OVEN SIZE
kW Btu/hr
kcal/hr
22 75,067
18,917
20.4 69,608
17,541
18.5 63,125
15,907
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3w 50/60 Hz
APPROXIMATE NET WEIGHT 685 lb
310.71 kg
APPROXIMATE SHIPPING WEIGHT 745 lb
337.92 kg
AIRFLOW
50 Hz
767 cfm
21.71 cmm
60 Hz
920 cfm
26.05 cmm
STEAM CONSUMPTION (MAX) 105 lb/hr
47.62 kg/hr
OPERATING STEAM PRESSURE 150 psi max
10.34 bar
EXHAUST CONNECTION (DIAMETER) 8”
20.32 cm
BOILER HORSEPOWER (NORMAL LOAD) 2.7 Bhp
SUPPLY CONNECTION (1) 3/4” N.P.T.
(Male)
RETURN CONNECTION (1) 3/4” N.P.T. (Male)
AD-50i / M-50p Specifications _____________________________________________________
NOTE: The manufacturer reserves the right to make changes in specifications at any time without notice or obligation.
GAS
STEAM
ELECTRIC
Shaded areas are stated in metric equivalents 5/15/18
* Blower / fan motor for single phase steam is 1 hp (0.75 kW). Blower / fan motor for 3-phase, all heat, is 1 hp (0.75 kW).