Need help?Do you have a question about the ADC ADView 2 and is the answer not in the manual?
General| Brand | ADC |
|---|---|
| Model | ADView 2 |
| Category | Diagnostic Equipment |
| Language | English |
Description of the device's purpose and intended application.
Details on when and for what conditions the device is indicated.
Outlines the user's obligations and responsibilities for device operation.
Guidelines and precautions for the proper use of the ADView 2 device.
Specific safety notes and handling for the SpO2 module.
Potential side effects or reactions that may occur during device use.
Critical warnings and cautions to prevent harm or damage.
Explanation of graphical symbols used on the device and in the manual.
List of common abbreviations used within the manual.
Instructions for unpacking the ADView 2 and checking components.
Diagram and description of connections on the rear panel of the device.
Procedure for installing temperature and SpO2 modules on the side panels.
Instructions for installing, charging, and disposing of the device's battery.
Steps for connecting accessories and information on mounting options.
Details on configuring the device settings using an application.
Explanation of the device's main measurement display interface.
Details on buttons, selection knob, monitor setup, and visual alarms.
Explanation of different power states and automatic power-down features.
Procedures for recording patient ID, measurements, and using the printer.
Instructions for saving measurements to device memory or EMR.
Guidelines for patient position, cuff, and switching between adult/pediatric modes.
Details on choosing Single, Averaging, or Manual BP measurement modes.
Configuration steps for averaging multiple BP measurements.
Configuration and step-by-step guide for Manual BP measurement.
How to record results and prepare the device for the next patient.
Methods for measuring heart rate using BP or SpO2 sources.
Explanation of how the pulse oximeter technology works.
Overview of the SpO2 module and steps for taking measurements.
Specific information and precautions for the Masimo SET SpO2 module.
Specific information and precautions for the ChipOx SpO2 module.
Details on the thermometer module and procedure for taking oral temperature.
Procedures for axillary, rectal, and descriptions of other temperature modes.
How to save, view, and manage measurements in the device memory.
Instructions for deleting measurements and sending data to EMR.
Guidelines for cleaning the ADView 2 device, sensors, and thermometers.
Routine checks, battery replacement, and disposal guidelines.
Guidelines for product/cuff disposal and routine calibration.
List of available optional modules and mounting accessories.
List of available blood pressure cuff sizes and types.
List of available power supply and temperature measurement accessories.
List of SpO2 accessories and other miscellaneous items.
Table of error codes, their meanings, and recommended user actions.
Specifies measurement ranges and provides service center contact information.
Answers to common questions regarding battery life, power down, and beeps.
Information regarding electromagnetic compatibility and interference.
General technical specifications, conditions for use, power, safety, and standards.
Factors affecting BP readings and detailed specifications for SpO2 and temperature sensors.
To Next Page