ADCMT 6247G - Page 89

6247G/6247C DC Voltage Current Source/Monitor Operation Manual
4. REFERENCE
4-1
Setting Parameters Pages Setting Parameters Pages
4. REFERENCE
This chapter describes panel keys, parameter groups, parameter items and parameter functions in the follow-
ing sections.
• 4.1 Menu Index: Use this section as an index for the parameters in the menu.
• 4.2 Function Description: Describes panel keys, parameter groups, parameter items and parameter
functions.
4.1 Menu Index
Use the Menu Index as the index for the set items in the menu.
A.Rng Delay ........................................... 4-8
Auto Zero ................................................ 4-8
Average ................................................... 4-10
Bias Value ............................................... 4-6, 4-7
Boud Rate ............................................... 4-14
BUS ......................................................... 4-13
Compare SW ........................................... 4-10
CompareBuz ........................................... 4-14
COMPUTE ............................................. 4-10
CONST ................................................... 4-11
Data Bit ................................................... 4-14
Data Set... ................................................ 4-10
Disp Digit ................................................ 4-9
Disp Unit ................................................. 4-9
Error Log ................................................. 4-15
EXT-SIGNAL ......................................... 4-11
First Value ............................................... 4-7
GPIB Adr ................................................ 4-13
Header ..................................................... 4-13
High Value .............................................. 4-11
Hold Time ............................................... 4-7
I/F ............................................................ 4-13
Integ Time ............................................... 4-8
Last Value ............................................... 4-7
Level Value ............................................. 4-6
Limit Buz ................................................ 4-14
LMT Input ............................................... 4-5
Low Value ............................................... 4-11
Max/Min SW .......................................... 4-10
Maximum ................................................ 4-10
Meas Delay ............................................. 4-7
MEASURE ............................................. 4-8
Measure SW ............................................ 4-8
Mem Clear .............................................. 4-9
Mem Recall ............................................. 4-9
MEMORY .............................................. 4-9
Mfunc Link ............................................. 4-9
Middle Value .......................................... 4-7
Minimum ................................................ 4-10
Notice Buz .............................................. 4-15
Null Value ............................................... 4-11
OPR Signal ............................................. 4-11
Param Load ............................................. 4-13
Param Save ............................................. 4-13
PARAMETER ........................................ 4-13
Parity ....................................................... 4-14
Period ...................................................... 4-8
PLS Base ................................................. 4-4
Pls Width ................................................. 4-7
PON. Load .............................................. 4-13
PSW Base ............................................... 4-6, 4-7
RANDOM MEMORY ............................ 4-10
Relay Cnt ................................................ 4-15
Repeat Cnt ............................................... 4-5
Response ................................................. 4-5
Reverse .................................................... 4-5
Rtrn Bias ................................................. 4-5
Sample .................................................... 4-10
Sample Cnt .............................................. 4-6
Save Data ................................................ 4-10
Scaling SW ............................................. 4-10
SCL Val_A ............................................. 4-11
SCL Val_B .............................................. 4-11
SCL Val_C .............................................. 4-11
Self Test .................................................. 4-15
Serial No. ................................................ 4-15