Need help?Do you have a question about the Adcom GSP-560 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Input Impedance | 47k ohms |
| Signal-to-Noise Ratio | 100dB |
| Input Sensitivity | 200mV |
Covers precautions for rain, water, heat, power, cord routing, cleaning, and servicing.
Details warnings related to electric shock, opening the unit, and polarized plugs.
Provides instructions and requirements for safely grounding outdoor antennas.
Explains how to use the manual for optimal system setup and understanding.
Illustrates and labels the controls and indicators on the GSP-560's front panel.
Details the connections and ports located on the rear of the GSP-560.
Guides on connecting the GSP-560 to control centers via processor or tape jacks.
Covers speaker connections, initial turn-on, volume settings, and Dolby Pro Logic mode selection.
Details the process of using the balance check circuit for audio calibration.
Covers unit installation, airflow, safety precautions, and line level connections.
Details center channel speaker connections, mode selection, and rear speaker considerations.
Explains initial turn-on, volume control positioning, and basic system setup steps.
Guides on volume control use, level adjustments, Dolby Pro Logic, and balance check calibration.
Covers resuming operation, master volume, operating modes, and rear channel delay settings.
Explains bass boost, subwoofer connection, and using external amplifiers for custom installations.
Provides instructions for cleaning, maintenance, and contacting technical support for assistance.
To Next Page
