5
2016 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED. Information and Specications Contained in this Document are Subject to Change, Amendments, and Additions at any Time, Without Notice
V17-2016-03-03
www
Specications
Models: CoRe+V2,
CoRe+VBV2, CoRe+PSV2
Revision: V2
Company Info: AddEnergie Technologies Inc.
Document revision number: V17-2016-03-03
©2016 AddÉnergie Technologies Inc. All Rights Reserved. This document is
protected by copyright laws of many countries and should not be modied,
reproduced or distributed without the prior written consent of AddÉnergie
Technologies.
Specications:
Models description:
• CoRe+V2: Level 2 charging station equiped with display and card reader
• CoRe+VBV2: Level 2 charging station without display and without card reader
• CoRe+PSV2: Level 2 charging station equiped with display, car reader and power sharing rmware
Output connector: J-1772 compliant
Split Phase 120/240 VAC Supply or 3 phase 120/208 VAC (must be protected by a 40A breaker or fuse)
Maximum output current( power):
• CoRe+V2 and CoRe+VBV2: 30A (7.2 kW @ 240V or 6.3 kW @ 208V)
• CoRe+PSV2: Dynamically controlled by a site controller between 8A and 30A (between 1.7 kW et 7.2 kW)
Built-in protection against overvoltage conditions and leakage current to ground
Operating Temperature Range: -40°C to +50°C
Certied to NEMA 4X enclosures requirements, suitable for outdoor use.
Shipping weight: Approximately 15 kg
Security standard compliance:
• CSA C22.2 No. 0-10 General Requirements – Canadian Electrical code, part II
• CSA 281.1-12/UL2231-1 Standard for safety for personnel protection systems for electrical vehicle (EV)
supply circuits: General requirements
• CSA 281.2-12/UL2231-2 Standard for safety for personnel protection systems for electric vehicle (EV)
supply circuits: Particular requirements for protection devices for use in charging systems
• CSA C22.2 No. 280-13/UL2594 (1st edition) Electric vehicle supply equipment (EVSE)
254081
To Next Page
Loading...