Fault/Remedy
27
CK 2302 DCF radio-controlled clock
English
Fault/Remedy
Fault Possible cause
The DCF77 signal for the time
cannot be received.
Check the chosen location.
Start the signal reception manually, if
necessary.
Adjust the time manually.
Temperature indication appears
too high.
Check whether the radio-controlled alarm
clock is exposed to direct sunlight.
The indicator is illegible, the
function is unclear, or the values
are obviously false.
Reset the radio-controlled clock to the state
at the time of delivery.
The time differs by exactly one,
two, three, etc. hours.
You have probably set an incorrect time
zone.
Technical data
Model: CK 2302 DCF radio-controlled clock
Battery:
4x LR06 (AA), 1.5 V
Rated current: 38 mA
Temperature measuring range: approx. -10 °C – 50 °C (-14 °F – 122 °F)
Distributor (no service address): GRENDS GmbH
Stahltwiete 23
22761 Hamburg, Germany
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.
Warranty
GRENDS GmbH warrants for 2 years from the date of purchase that it will remedy any
defects due to faulty material or workmanship free of charge by repair or replacement.
In the event of a warranty claim, please return the product with the proof of purchase
(specifying the reason for claim) to your dealer.
To Next Page
Loading...
