M320600-01-160525-Rev002-UM-e 5
Power supply
The scale is operated either by 4 x AA 1,5V alkaline batteries or by the mains. Turn the scale around and open
the battery compartment. Insert the enclosed AA alkaline batteries. Please observe the correct polarity as
shown inside the battery compartment.
For mains operations connect the supplied 6,0V 1,0A AC/DC adaptor to the power socket underneath the
scale.
The Auto-off function will turn off the scale when operated on batteries after 90 sec. When operated on mains
after 7 min.
Replace the batteries when „Lo“ is being displayed. It indicates low battery power or use the mains connec-
tion.
Display
Front view of the display and description