Inserting/changing batteries
For use you require 2 batteries of type LR03
(AAA), 1.5 V (included).
1. Open the battery compartment on the rear
side.
2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to the
correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
A change of batteries is necessary when the
battery symbol
or nothing at all is shown on
the display.
Only use the type of battery that is specied
in the “Technical Data”.
Always exchange all of the batteries at the
same time.
Dispose of batteries in an environmentally
appropriate way (see “Disposal”).
To Next Page
Loading...
Need help?
General
