Starting signal reception
41
Weather station with radio alarm clock WS 1710
English
If you select the 12-hour time format, morning hours are marked with "AM"
and afternoon hours with "PM" in the display.
3. Push the multi-function knob to confirm the setting. "00" flashes in the display.
4. Select the time zone you are in (for most countries in Europe, "00" is the correct
setting) using the rotary knob.
5. Push the multi-function knob to confirm the setting.
6. Carry out the following settings:
− Hours
− Minutes
− Date format (Day/Month or Month/Day)
− Year
− Month
− Day
− Language of the weekday abbreviation "DAY"
− Weather symbol
7. Finally, push the multi-function knob to complete the operation.
Manually starting signal reception to the time signal
transmitter
If the radio signal symbol to the left is no longer displayed, the radio signals
from the time signal transmitter are no longer being received. The time indicator
nevertheless continues precisely.
− Press and hold the WAVE button until the radio signal symbol is displayed again.
The signal reception is thus started manually.
Pay attention to the following:
If the reception was not successful, the reception symbol fades out after a few
minutes and the time on the display continues normally.
Upon successful signal reception, the radio-controlled alarm clock adjusts itself to
the time of the time signal transmitter. If you have already made manual settings,
these are automatically adjusted.
Druckbuch WS1710 DE EN.indb 41 02.06.2017 13:45:46
To Next Page
Loading...
Need help?
General
