Alarm
48
Weather station with radio alarm clock WS 1710
5. Set the desired alarm minute with the multi-function knob.
6. Push the multi-function knob to confirm the setting.
"L20" or the value of the last set volume level flashes in the display.
7. Set the desired alarm volume with the multi-function knob.
8. Push the multi-function knob to confirm the setting.
The setting operation is completed.
When setting an alarm time, the alarm function is activated automatically. It
indicated by the symbols or .
Being awakened
At the set time, you will be awakened by the selected alarm source (buzzer or radio),
where the alarm volume becomes more intense as the alarm duration increases.
Switching off the alarm for 24 hours
− Press any button (except the multi-function knob) to stop the alarm. After
24hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off automatically after 30 minutes.
After 24 hours, the alarm will be triggered again.
Snooze function
− Press the multi-function knob 1x when the alarm sounds.
The alarm signal stops and the alarm symbol
or and Z
Z
flashes in the display.
After 8 minutes, the device switches on again and wakes you up again.
This procedure can be repeated multiple times.
Turning the alarm off completely
Deactivate and activate the respective alarm function by repeatedly pressing the SET
button.
Press SET 1x:
is displayed: Alarm 1 is active, Alarm 2 is deactivated
Press SET 2x:
is displayed: Alarm 1 is deactivated, Alarm 2 is active
Press SET 3x:
and are displayed: Alarm 1 and 2 are active
Press SET 4x: Alarm symbols are no longer displayed: Alarm 1 and 2 are deactivated
Druckbuch WS1710 DE EN.indb 48 02.06.2017 13:45:47
To Next Page
Loading...
Need help?
General
