ADE WS 2132 - Alarm Function: Stopping, Auto-Stop, and Snooze; Other Functions: Display Backlight

70
Weather station with ventilation recommendation WS 2132
Stopping the alarm
− Press any button on the base station (except
SNOOZE/LIGHT) to stop the alarm.
After 24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm
will be triggered again.
Repeat alarm (SNOOZE function)
− Press SNOOZE/LIGHT once when the alarm signal
sounds.
The alarm signal stops according to the setting
made (default setting: 5 minutes). Then the device
switches back on and the alarm sounds again. This
procedure can be repeated multiple times.
− To exit snooze mode, press any button (except
SNOOZE/LIGHT) or press and hold SNOOZE/LIGHT
for more than 2 seconds.
Other functions
Illuminating the display
− Press SNOOZE/LIGHT to switch on the display
illumination for approx. 8 seconds.