ADE WS 2132 - Troubleshooting: Inaccurate Outdoor Temperature Readings; Troubleshooting: Display Value Error Messages; Troubleshooting: Device Reset Procedure

72
Weather station with ventilation recommendation WS 2132
Fault Possible cause
Temperature indication
for the outdoor sensor
appears too high.
 Check whether the
sensor is exposed to
direct sunlight.
The display shows “H.HH”
or “LL.L” instead of the
measured values.
 The values lie
above or below the
measurement range.
Display is illegible,
function is unclear or
values are obviously
incorrect.
Reset the weather station
to the delivery state.
1. Remove the batteries
from the outdoor
sensor and the base
station.
2. Wait a moment.
3. Proceed as described
in “Start-up”.