57
Weather Station with Wireless Outdoor Sensor WS 2136-x
English
3. Using the + and – buttons, set the desired alarm hour.
The alarm symbol will automatically be shown on
the display. It indicates that the alarm function is
enabled.
If you press and hold the + or –buttons, the
displayed values will be increased or decreased
more quickly.
4. Press SET.
The minute indicator for the alarm time blinks on the
display.
5. Using the + and – buttons, set the desired alarm minute.
6. Press SET.
Use the + or – buttons to set the desired SNOOZE time
(pause between two repeat alarms). If you select OFF,
the SNOOZE function is deactivated
7. Finally, press SET.
In a few moments, the display will return to normal time.
Waking up
At the set time, you will be woken by an alarm signal,
which will become more intense as the waking time
increases.
Switching the alarm off completely
− Press any button (except SNOOZE/LIGHT) to stop
the alarm. After 24 hours, the alarm will be triggered
again.
To Next Page
Loading...
