60
Weather Station with Wireless Outdoor Sensor WS 2136-x
Fault/Remedy
Fault Possible cause
The DCF77 signal for the time
cannot be received.
Check the chosen
location.
Start the signal
reception manually, if
necessary.
Adjust the time
manually.
Temperature indication of
the outdoor sensor appears
too high.
Check whether the
outdoor sensor is
exposed to direct
sunlight.
Instead of showing the
measured values for
temperature or humidity, the
display shows H.HH or LL.L.
The values lie
above or below the
measurement range.
In the OUT region of the
display, no values are shown.
Press and hold – in
order to start wireless
reception to the
outdoor sensor
manually.
The indicator is illegible, the
function is unclear, or the
values are obviously false.
see “RESET function”
To Next Page
Loading...
