To Next PageTo Next Page
Need help?Do you have a question about the ADEMCO Galant 6128 RFH and is the answer not in the manual?
General| Wireless | Yes |
|---|---|
| Power Source | Battery |
| Backlight | Yes |
| Type | Keypad |
| Model | 6128RFH |
| Compatibility | ADEMCO/Honeywell security systems |
| Display | LCD |
| Keypad Layout | Standard |
| Communication | RF |
Instructions for setting the system to full mode, including exit tone and confirmation.
Instructions for setting selected areas of the system to part mode.
Enables setting selected areas while others remain unset for user freedom.
Steps to omit specific zones from system activation using the keypad.
Procedure to restore all previously omitted zones to normal operation.
Procedure to change the master user code (User 1) on the system.
Steps for programming new user codes into the system using the master code.
Instructions for users to delete their own codes via keypad entry.
Detailed steps for programming a new key fob to a user number on the system.
Instructions for deleting a key fob, either the code and fob or the fob only.
How to use a programmed key fob for setting and unsetting the system.
Steps to program specific zones to activate a chime alert upon activation.
Instructions to disable the chime function for all zones on the system.
Steps to trigger a panic alarm using a specific hotkey combination on the keypad.
Lists key system settings like entry time, exit time, and easy set options.
Section to record alarm company contact information, phone numbers, and account.
