4198-12 1.0
Assembly Instructions (English)
353 West 39
Street, 2
Floor, New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
ASSEMBLY INSTRUCTION FOR
Cabana Floor Lamp
Model# 4198-12
1. Screw pole (B) onto base (A) clockwise until tight.
2. Screw poles (B), (C),(D) and socket (E) together.
3. Socket ring (G) comes pre-assembled to the
socket. Before placing the shade onto the socket,
please unscrew this socket ring.
4. Place shade (F) onto socket (E) and tighten it with
socket ring (G).
5. Install vintage bulb (H) onto socket.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician.Do not use with an extension cord unless the
plug can be fully inserted. DO NOT ALTER THE
PLUG .
-------------------------------------------------------
BULB TYPE: Use only with maximum of 1*60W
vintage bulb (bulb included).
PARTS DIAGRAM
(1) * Socket ring (G) (1) * Vintage bulb(H)
To Next Page
Need help?
General
