4157-21 / 26 1.0
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Jacob Table Lamp
Model# 4157-21 / 26
353 West 39
Street, 2
Floor, New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
1. Screw pole (B) onto base (A) clockwise until tight.
2.. Screw pole (B) and curved pole (C) together.
3. Socket ring comes pre-assembled to the socket. Before placing the shade
onto the socket, please unscrew this socket ring.
4. Place shade (D) onto socket and tighten it with socket ring (E).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of electric
shock (one blade is larger than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician.Do not use with an extension cord unless the plug
can be fully inserted. DO NOT ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: Use only with 1 type A Max 100W bulbs (not included).
To Next Page
Need help?
General
