4235-22 1.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
ASSEMBLY INSTRUCTION FOR
Sonic LED Arc Lamp
Model# 4235-22
21 Penn Plaza Suite 909 New York,NY 10001
1. Insert tube (B) to base (A) and tighten it by
screwing it with part(K).
2. Insert tube (C) to (B) and place the hex screw (E)
clockwise into tube (C) and tighten it by allen wrench
(F).
3. Insert tube (D) to (C) and place the hex screw (E)
clockwise into tube (D) and tighten it by allen
wrench (F).
4. Insert the adaptor (I) into power cord (J).
* Touch Dimmer switch on pole , please touch it
to turn on. *
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a
feature to reduce the risk of electric shock (one
blade is larger than the other). This plug will fit in a
polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.Do not use
with an extension cord unless the plug can be fully
inserted. DO NOT ALTER THE PLUG .
PARTS DIAGRAM
(4) * HEX screw(E)
(1) * allen wrench (F)
To Next Page
Need help?
General
