How to fix Adexa Ice Maker when the “Add Water” indicator is on?
If the “Add Water” indicator is illuminated on your Adexa Ice Maker, it signifies a lack of water. To resolve this, stop the ice maker, replenish the water supply, and then press the “Power” button to restart the unit.
What to do if the “Ice” indicator is on in my Adexa HZB-15/SA Ice Maker?
If the “Ice” indicator is on, it means there is too much ice in your Adexa Ice Maker. Simply remove some ice from the ice basket.
Why is my Adexa Ice Maker not making ice even though the cycle is normal?
If your Adexa Ice Maker is running its cycle normally but not producing ice, it could be due to a few reasons. The ambient temperature or the water temperature in the inner tank might be too high; try running the ice maker below 32 degrees and using colder water. Alternatively, there might be a refrigerant leak or a blockage in the cooling system pipe, which would require verification by a qualified technician.
To Next Page
General
