To Next Page
J
John SinghAug 14, 2025
Why is the ' ' indicator on my Adexa Ice Maker?
- MMelissa ConradAug 14, 2025
The ' ' indicator illuminates when the ice storage bin is full. Simply remove some ice cubes to resolve the issue.
Why is the ' ' indicator on my Adexa Ice Maker?
The ' ' indicator illuminates when the ice storage bin is full. Simply remove some ice cubes to resolve the issue.
What to do if the ' ' indicator is on in my Adexa HZB-45 Ice Maker?
The ' ' indicator turns on when there's no water supply. Ensure the main water supply pressure is adequate and that the water supply hose isn't blocked. Increase the water pressure or clean the hose if necessary. Also, check if the floating ball of the water level detecting switch is blocked and clean the water tank and the water level detecting switch if needed. Make sure that the unit is placed on a level surface. Also, ensure the water drain pipe of the water tank is properly installed in its slot.
Why is my Adexa HZB-45 Ice Maker making very thin ice cubes?
Thin ice cubes can result from a high ambient temperature. Try moving the unit to a cooler location or lengthening the ice-making cycle. Poor air circulation around the unit could also be the reason. Ensure there's at least 20 cm of space between the unit's back and front and any obstructions.
What to do if my Adexa Ice Maker starts but no water flows and the ' ' indicator flashes?
This issue occurs when the water supply hose is broken or water flows in very slowly. Check the main water supply pressure and ensure the water supply hose isn't blocked. Increase water pressure or clean the hose if necessary.
Why is my Adexa HZB-45 Ice Maker producing irregular ice cube shapes?
Irregular ice cube shapes can be caused by poor water quality or a dirty water tank. Clean the water tank and replace the water. Also, partially blocked holes on the water dividing pipe can cause this. Clean the water dividing pipe, ensuring all nine holes are clear.
Why is my Adexa HZB-45 producing ice cubes that are too thick?
If the ice cubes are too thick, it may be because the ambient temperature is too low. Try reducing the duration of each ice-making cycle.
Why is my Adexa Ice Maker's ice cube transparency not very good?
The transparency of the ice cube may be poor due to bad water quality. Change the water supply, or use a water filter to soften or filter the water.
What to do if my Adexa HZB-45 cycle is normal, but no ice is produced?
No ice production can occur if the ambient temperature or the water temperature in the water tank is too high. Move the unit to a place with a temperature lower than 90 degrees Fahrenheit and use low-temperature water. If this doesn't solve the problem, refrigerant leakage or a clogged cooling system tube may be the cause, requiring technical service.
What to do if the water pump is working, but no water flows out from the water dividing pipe of my Adexa HZB-45?
If the water pump is working but no water flows out, the little holes on the water dividing pipe may be blocked. Clean these little holes to restore water flow.
Covers essential safety measures for using the appliance, including electrical, operational, and environmental hazards.
Explains the color coding of the mains lead wires for proper electrical connection and safety.
Details the physical size and connection points of the ice maker unit.
Lists the electrical and operational ratings, including power, capacity, and environmental conditions.
Identifies and describes the main external components of the ice maker unit.
Details the specific components involved in the ice-making process and water tank assembly.
Explains the layout and functions of buttons and display elements on the control panel.
Describes the various symbols, indicators, and error codes displayed on the LCD screen.
Details how to use the "+" and "-" buttons for adjusting ice thickness and timer settings.
Lists and identifies various parts of the ice maker with their corresponding numbers and materials.
Step-by-step instructions for removing the ice maker from its packaging and initial checks.
Guidelines for selecting a suitable location, including clearance and environmental conditions.
Critical warnings and instructions regarding safe electrical connection and grounding.
Details the proper grounding procedure for safe operation of the appliance.
Outlines the process for cleaning the ice maker's internal parts before its first use.
Step-by-step guide to connect the water supply hose to the unit's inlet port.
Instructions on how to connect the unit's drain pipe to the main drainage system.
Details on attaching the water hose to the main water supply faucet using a quick connector.
Guides on powering on the unit, the ice making cycle, and water level indicators.
Explains how to use control panel buttons to adjust the ice thickness.
Instructions on setting automatic shutdown or startup timers for the ice maker.
Details on how to initiate and cancel the automatic cleaning cycle for the ice maker.
Illustrates the electrical connections and components of the ice maker system.
Describes typical sounds produced by the ice maker during operation and their causes.
Step-by-step guide for draining the unit and preparing it for extended periods of non-use.
Important safety precautions and warnings before performing cleaning or maintenance tasks.
Recommendations for periodic cleaning and maintenance to ensure efficiency and longevity.
Instructions for cleaning the outer surfaces of the ice maker using mild detergents.
Guidelines for sanitizing the ice storage bin and other interior parts.
Procedures for cleaning critical components like the evaporator and water dividing pipe.
Detailed steps for cleaning the ice making system using a specific commercial cleaner.
Recommendations for daily, semi-monthly, and semi-annual cleaning tasks.
A comprehensive list of common issues, their possible causes, and recommended solutions for the ice maker.
Explains various error codes displayed on the unit and their meanings.
Details what the product warranty covers, conditions for claims, and common exclusions.
Information on how to dispose of the product responsibly for environmental safety.
This document is an instruction manual for an Automatic Ice Maker, model HZB-45, manufactured by Adexa Catering Equipment Direct.
The Adexa HZB-45 is an automatic ice maker designed for commercial or household use, capable of producing ice cubes. It features an ice-making system that includes an evaporator, water tank, and water pump, along with various sensors to detect ice levels and water availability. The unit is equipped with a control panel for operation and timing settings, as well as an automatic self-cleaning program.
The ice maker is designed for ease of use with a clear operation panel.
The manual provides comprehensive instructions for cleaning and maintenance to ensure efficiency, performance, hygiene, and longevity.
General
