Instruction Manual
ST——Thermostat XD1~XD3——Indicator light HL——Interior canopy lighting
KM1~KM2——AC Contactor EH1~EH2——Electric heater
C1~C2—— Starting capacitance YV——Electromagnetic valve M1~M2——Fan
Operating principle
⚫ Hot Air Circulation Function
⚫ Time Control Function
⚫ Spray Function
2.2 Basic Parameters
3. Attention
3.1. Transportation & Storage
During transporting, the products should be laid down carefully to prevent severe shock; packaged
furnace should not be stored in open air for a long time, it should be placed on well-ventilated,
non-corrosive gas storage and could not be inverted. Take anti-rain measures when there is any
temporary storage
3.2 Installation & Attention
Installation
1. All power equipment and circuit wiring must be installed according to safety
standards by qualified electrical personnel
2. Check Installation place
⚫ Check the electrical connection and see if it is required to connect according
⚫ to the instructions before installation.
3. Rubber Feet
To Next Page