Industrial Electronic Devices
ADFweb.com S.r.l.
EtherCAT Slave / PROFINET Slave
Document code: MN67E23_ENG Revision 1.000 Page 12 of 28
USE OF COMPOSITOR SW67E23:
To configure the Converter, use the available software that runs with Windows called SW67E23. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67E23, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67E23
To Next Page
Loading...