Industrial Electronic Devices
ADFweb.com S.r.l.
EtherCAT Slave / PROFINET Slave
Document code: MN67E23_ENG Revision 1.000 Page 19 of 28
PROFINET XML:
By pressing the “PROFINET XML” button it is possible to save the GSDML file for the PROFINET side of the converter.
The GSDML file is used to configure the PROFINET Master.
ETHERCAT ESI FILE:
By pressing the “EtherCAT ESI File” button it is possible to save the ESI file for the EtherCAT side of the converter.
The ESI file is used to configure the EtherCAT Master.
To Next Page
Loading...