Industrial Electronic Devices
ADFweb.com S.r.l.
EtherCAT Slave / PROFINET Slave
Document code: MN67E23_ENG Revision 1.000 Page 22 of 28
PLC CONFIGURATION (for PROFINET):
The configuration and commissioning of the PROFINET Converter as described on the following pages was accomplished with the help of the
TIA Portal V12-software by Siemens. In the case of using a control system from another supplier, refer to attend to the associated
documentation.
These are the steps to follow:
1) Install the description file of the module.
To Next Page
Loading...