PowerLab Teaching Series - Owner’s Guide
39
Signal-noise ratio: > 100 dB (± 10 V range)
Accuracy error: Less than 0.2 %
Non-linearity (max): 0.1 %
Filters - Low pass: 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000 Hz
and Anti-alias
- Notch: Mains
POD Connectors (DIN)
General features: Combined power, I
2
C and single-ended or
di erential analog input signals on one connector,
support SmartPod transducers, etc.
Supply voltage: ± 5 V regulated
Maximum current: 50 mA per pod connector
Communications: 2-wire I
2
C
Signal input: Positive and negative analog inputs and analog
return
Connector type: 8-pin DIN with metal surrounds
Sampling
ADC sampling: Simulaneous across channels
ADC resolution: 24-bits (16-bits resultant)
ADC linearity: ±0.0006 % FSR (INL)
Available sampling rates: 100 000 samples/s down to 10 min/sample
Bio Amp Input- Inputs 3 & 4 (PowerLab 15T & 26T)
Number of channels: 2
Input configuration: Di erential with common isolated ground
To Next Page
Loading...
Need help?
General
