ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, Netherlands
HANDLING AND TRANSPORTATION
The 3 front corners of the DS4T Triangle LED Video Panel are susceptible to damage during handling
and transportation. When removing DS4 LED Video Panels from their respective Flight Cases, and
before they are installed, take care to avoid damaging any of the 4 corners.
Corner Frangibility
Because these are ESD sensitive units, use ESD precautions when removing the DS4T Quarter
Circle Panels from their flight case (ESD gloves, protective clothing, wrist straps, etc.). In addition to
using standard ESD precautions, to reduce static building friction, take care to lift the panels without
rubbing the LED panel surface along the foam-covered clapboard, which can generate static
electricity that can damage LEDs on DS4T Panel. The optional DS4TFC10 Flight Case (sold
separately) for the DS4T Quarter Circle panels holds 10x DS4Ts.
DS4T Triangle Panels stored without ESD bags
DS4T LED Video Panels are
susceptible to damage at corners
DS4QC and DS4T
Panels shown in an
optional flight case
(Sold Separately)
To Next Page
Loading...
General