Need help?Do you have a question about the ADJ ENCORE FR50Z and is the answer not in the manual?
Details ADJ Products, LLC warranty obligations, exclusions, and limitations for products purchased in the USA.
Specifies warranty durations for different product categories like LED, Laser, and DMX Controllers.
Follow all instructions and guidelines to ensure safe operation and prevent injury or damage.
Ensure proper grounding, avoid dimmer packs, unplug before servicing, and keep flammable materials away.
Avoid looking directly into the light source; risk of retina injury or blindness. Sensitive persons may suffer epileptic shock.
Use only in indoor/dry locations. Maintain specified distances from objects, surfaces, and flammable materials.
Rules regarding water, liquids, power cords, dimmer packs, ventilation, and unit operation.
Guidelines for cleaning, heat source placement, and conditions requiring qualified service personnel.
Perform electrical checks, tighten fasteners, inspect for deformations, and check power cables.
Keep away from flammable materials. Maintain specified distances from objects, surfaces, and flammable materials.
Use qualified electricians for connections. Consult installers for rigging; use safety cables and follow codes.
Operate within specified temperature range. Allow cooling time before servicing. Avoid walking paths.
Avoid exposing the fixture lens to direct sunlight, lasers, or other light sources to prevent internal damage.
Provides step-by-step instructions for installing barn doors onto the fixture.
Explains the DMX-512 protocol for communication between controllers and fixtures.
Describes how to link multiple DMX fixtures together in a chain for controller operation.
Allows units to link in a Primary-Secondary setup for synchronized operation.
Details DMX channel assignments and their corresponding functions and values for different modes.
Details ADJ Products, LLC warranty obligations, exclusions, and limitations for products purchased in the USA.
Specifies warranty durations for different product categories like LED, Laser, and DMX Controllers.
Follow all instructions and guidelines to ensure safe operation and prevent injury or damage.
Ensure proper grounding, avoid dimmer packs, unplug before servicing, and keep flammable materials away.
Avoid looking directly into the light source; risk of retina injury or blindness. Sensitive persons may suffer epileptic shock.
Use only in indoor/dry locations. Maintain specified distances from objects, surfaces, and flammable materials.
Rules regarding water, liquids, power cords, dimmer packs, ventilation, and unit operation.
Guidelines for cleaning, heat source placement, and conditions requiring qualified service personnel.
Perform electrical checks, tighten fasteners, inspect for deformations, and check power cables.
Keep away from flammable materials. Maintain specified distances from objects, surfaces, and flammable materials.
Use qualified electricians for connections. Consult installers for rigging; use safety cables and follow codes.
Operate within specified temperature range. Allow cooling time before servicing. Avoid walking paths.
Avoid exposing the fixture lens to direct sunlight, lasers, or other light sources to prevent internal damage.
Provides step-by-step instructions for installing barn doors onto the fixture.
Explains the DMX-512 protocol for communication between controllers and fixtures.
Describes how to link multiple DMX fixtures together in a chain for controller operation.
Allows units to link in a Primary-Secondary setup for synchronized operation.
Details DMX channel assignments and their corresponding functions and values for different modes.
General| Control type | Buttons |
|---|---|
| Product type | Disco spotlight |
| Product color | Black |
| Suitable for indoor use | Yes |
| Power source | AC |
| Input voltage | 100 - 240 V |
| Input frequency | 50 - 60 Hz |
| Power consumption (typical) | 50 W |
| Lamp type | LED |
| Lamps quantity | 1 lamp(s) |
| Color temperature | 3000 K |
| Dimming range | 0 - 100 % |
| Quantity | 1 |
Weight and Dimensions| Ball diameter | - \ |
|---|
To Next Page
