Need help?Do you have a question about the ADJ VIZI BEAM 12RX and is the answer not in the manual?
General introduction to the manual and product usage.
Instructions for unpacking the fixture and checking for damage.
Contact information for ADJ service and support.
Detailed terms of the limited warranty and exclusions.
Lists warranty durations for various ADJ product types.
Requirement for proper grounding and key safety warnings.
Specifies clearance and temperature limits for safe operation.
Warnings about high intensity UV radiation and eye/skin protection.
Precautions for operation, cooling, power cords, and ventilation.
Warnings about handling discharge lamps and their pressure.
UV notice and precautions for safe lamp replacement.
Recommendations for cleaning the fixture's optics and exterior.
Points to check during regular maintenance for safety and function.
Labels for buttons, display, ports, and other fixture parts.
Details the colors and features of the color wheel.
Illustrates static gobos and their patterns.
Step-by-step instructions for replacing the fixture's lamp.
Specifies distance from flammables and qualified electricians.
Guidelines for safe mounting, rigging, and overhead installation.
Instructions for installing omega brackets and clamps.
Emphasizes attaching safety cables for suspended installations.
Stresses the need for experience in rigging and avoiding improper installation.
Specifies allowed mounting positions (vertical/horizontal).
Warns against exposing the fixture to external light beams.
Explains how to navigate the system menu using buttons and LCD.
Configuration options for DMX address and channel mode.
Options related to motor resets and display settings.
Setting manual controls and accessing fixture data.
Detailed steps for setting DMX mode and no DMX status.
Adjusting pan/tilt invert, feedback, and resetting motors.
Configuring hibernation mode and specific motor resets.
How to reset various functions and adjust display settings.
Accessing calibration, USB power, update, and factory restore.
Detailed guide for manual control of fixture parameters.
Accessing fixture data and managing lamp ON/OFF.
Table detailing DMX channels for Pan, Tilt, and Color functions.
Table detailing DMX channels for Gobo functions.
Table detailing DMX channels for additional functions.
Lists common error codes and their meanings.
Details lamp, features, and wheel specifications.
Specs for control, power, connections, size, and weight.
Visual representation of fixture dimensions in inches and mm.
Compliance statement and interference warnings.
Advice on energy conservation and power management.
General introduction to the manual and product usage.
Instructions for unpacking the fixture and checking for damage.
Contact information for ADJ service and support.
Detailed terms of the limited warranty and exclusions.
Lists warranty durations for various ADJ product types.
Requirement for proper grounding and key safety warnings.
Specifies clearance and temperature limits for safe operation.
Warnings about high intensity UV radiation and eye/skin protection.
Precautions for operation, cooling, power cords, and ventilation.
Warnings about handling discharge lamps and their pressure.
UV notice and precautions for safe lamp replacement.
Recommendations for cleaning the fixture's optics and exterior.
Points to check during regular maintenance for safety and function.
Labels for buttons, display, ports, and other fixture parts.
Details the colors and features of the color wheel.
Illustrates static gobos and their patterns.
Step-by-step instructions for replacing the fixture's lamp.
Specifies distance from flammables and qualified electricians.
Guidelines for safe mounting, rigging, and overhead installation.
Instructions for installing omega brackets and clamps.
Emphasizes attaching safety cables for suspended installations.
Stresses the need for experience in rigging and avoiding improper installation.
Specifies allowed mounting positions (vertical/horizontal).
Warns against exposing the fixture to external light beams.
Explains how to navigate the system menu using buttons and LCD.
Configuration options for DMX address and channel mode.
Options related to motor resets and display settings.
Setting manual controls and accessing fixture data.
Detailed steps for setting DMX mode and no DMX status.
Adjusting pan/tilt invert, feedback, and resetting motors.
Configuring hibernation mode and specific motor resets.
How to reset various functions and adjust display settings.
Accessing calibration, USB power, update, and factory restore.
Detailed guide for manual control of fixture parameters.
Accessing fixture data and managing lamp ON/OFF.
Table detailing DMX channels for Pan, Tilt, and Color functions.
Table detailing DMX channels for Gobo functions.
Table detailing DMX channels for additional functions.
Lists common error codes and their meanings.
Details lamp, features, and wheel specifications.
Specs for control, power, connections, size, and weight.
Visual representation of fixture dimensions in inches and mm.
Compliance statement and interference warnings.
Advice on energy conservation and power management.
General| Power source | AC |
|---|---|
| Input voltage | 100 - 240 V |
| Input frequency | 50 - 60 Hz |
| Power consumption (typical) | 384 W |
| Control type | Buttons |
| Product type | Disco spotlight |
| Product color | Black |
| Suitable for indoor use | Yes |
| Lamp type | LED |
| Bulb power | 260 W |
| Light color | Multi |
| Bulb lifetime | 6000 h |
| Color temperature | 7800 K |
| Quantity | 1 |
| Lighting modes | DMX |
| Beam angle (max) | 2 ° |
| DMX channels quantity | 16 channels |
| Minimum DMX channels quantity | 2 channels |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 343.5 mm |
| Height | 565 mm |
| Weight | 18000 g |
| Ball diameter | - \ |
To Next Page
