What to do if my ADJ VIZI CMY 16RX DJ Equipment has no light output?
If your ADJ DJ Equipment has no light output, first ensure the lamp is switched "On". Then, check the external fuse located on the bottom panel of the unit to see if it has blown. Also, remove the lamp holder and make sure the lamp is correctly seated in its socket. Finally, verify that the fuse holder is completely and properly seated.
Critical safety advice regarding the discharge lamp, including UV radiation and explosion risk.
Information on lamp lifetime, replacement, and usage limits to prevent damage.
Ensures installation areas support 10x weight and emphasizes secondary safety attachments.
Describes operational positions: upside-down, sideways on trussing, or flat surface.
Details the use of clamps, omega holders, and quick-lock fasteners for installation.
Explanation of the DMX-512 protocol for communication between fixtures and controllers.
Describes how to connect multiple DMX fixtures in a chain for synchronized operation.
Specifies the need for approved DMX-512 110 Ohm shielded data cables.
Explains the use of a terminator on the last unit to prevent erratic behavior.
Explains how to use universal DMX-512 controllers for tailored programming.
Illustrates and explains the process of connecting fixtures in a DMX daisy chain.
Reiterates the importance of terminating the DMX signal on the last unit.
DMX channels for selecting rotating gobos and controlling their rotation and speed.
DMX values for controlling strobe effects and dimmer intensity.
Step-by-step guide to setting the DMX address of the fixture.
Setting the fixture's behavior when the DMX signal is lost or power is applied.
Information on errors related to lamp startup, temperature, and lamp hour usage.
Details on CPU errors, memory issues, and various random reset failure messages.
Steps to safely replace the fuse in the unit.
Detailed steps for safely replacing the discharge lamp, including cooling time.
Visual guide and steps for removing and installing the fixture lamp.
Solutions for common issues causing the unit to have no light output.
Detailed table of electrical, optical, and physical specifications for the Vizi CMY 16RX.
Steps for obtaining warranty service, including obtaining an RA# and shipping instructions.
Details the duration of the limited warranty for different product types.
Critical safety advice regarding the discharge lamp, including UV radiation and explosion risk.
Information on lamp lifetime, replacement, and usage limits to prevent damage.
Ensures installation areas support 10x weight and emphasizes secondary safety attachments.
Describes operational positions: upside-down, sideways on trussing, or flat surface.
Details the use of clamps, omega holders, and quick-lock fasteners for installation.
Explanation of the DMX-512 protocol for communication between fixtures and controllers.
Describes how to connect multiple DMX fixtures in a chain for synchronized operation.
Specifies the need for approved DMX-512 110 Ohm shielded data cables.
Explains the use of a terminator on the last unit to prevent erratic behavior.
Explains how to use universal DMX-512 controllers for tailored programming.
Illustrates and explains the process of connecting fixtures in a DMX daisy chain.
Reiterates the importance of terminating the DMX signal on the last unit.
DMX channels for selecting rotating gobos and controlling their rotation and speed.
DMX values for controlling strobe effects and dimmer intensity.
Step-by-step guide to setting the DMX address of the fixture.
Setting the fixture's behavior when the DMX signal is lost or power is applied.
Information on errors related to lamp startup, temperature, and lamp hour usage.
Details on CPU errors, memory issues, and various random reset failure messages.
Steps to safely replace the fuse in the unit.
Detailed steps for safely replacing the discharge lamp, including cooling time.
Visual guide and steps for removing and installing the fixture lamp.
Solutions for common issues causing the unit to have no light output.
Detailed table of electrical, optical, and physical specifications for the Vizi CMY 16RX.
Steps for obtaining warranty service, including obtaining an RA# and shipping instructions.
Details the duration of the limited warranty for different product types.
General| Type | Moving Head |
|---|---|
| Color Mixing | CMY |
| Gobo Wheel 2 | 14 Static Gobos + Open |
| Frost Filter | Yes |
| Pan Range | 540° |
| Tilt Range | 270° |
| Voltage | 100-240V, 50/60Hz |
| Control | DMX |
| Dimensions | 410 x 325 x 695 mm |
| Color Wheel | 14 dichroic colors + white |
To Next Page
