Adkins BETA MAJOR - Beta Major Specifications

Page 3
1.2 Specifications of the Beta Major
The Beta Major is a pneumatically operated heat press for transfer
printing and material fusing. It is ideal for high volume production with
low operator fatigue.
The work area of the Beta Major is 38 x 50 cm (15 x 20 in) but
machines may have, to special order, optional smaller sized
interchangeable worktables of any size and various shapes within this
table size.
Specifications
Power consumption 2.5 kW
Power supply 230 Volts AC
Compressed air supply 7 bar max (101.5 Psi max)
Compressed air consumption 60 cu. litres/min (2 cu. feet/min)
Working temperature 70 - 235
o
C
Display timer range 0 – 9.59 min
Machine height 52 cm (20.5 in)
Machine width 59 cm (23.2 in)
Machine width, loading 79 cm (31 in)
Machine depth 57 cm (22.5 in)
Machine depth, loading 104 cm (41 in)
Machine working area 80(W) x 52(H) x 105(D) cm
(31.5(W) x 20.5(H) x 41.3(D) in)
N
et weigh
t
69 Kg (152 lbs.)
Gross weight 77 Kg (170 lbs.)
Press pad dimensions 38 x 50 cm (15 x 20 in)
Fuses 12.5 A
A-weighted noise level <70dB(A)