cExpress-AL
Specifications 5
Boot Device Support
Windows 10
Enterprise
Linux
(Yocto)
Windows IOT
Core
eMMC 5.0
Yes Yes TBD
Storage only
SD
Yes Yes TBD
eMMC 5.0
Yes Yes TBD
OS Installation
SD
No No TBD
Note: eMMC and SD functionality as an OS installation device may change dependent on Intel updates. Please
contact your local sales representative for more information.
2.7. Serial I/O
z Ports: 2x UART ports COM 1/2 (COM 1/2 supports console redirection), baud rate up to 115.2 kbps
Port Description IRQ Address
Console Redirection
Support
COM 1 Supported by module (SER0, A98/A99), via NCT5104D 10 0x240 Yes
COM 2 Supported by module (SER1, A101/A102), via NCT5104D 11 0x248 Yes
COM 3 Supported by Super I/O (W83627DHG) on carrier board 4 0x3F8 Yes
COM 4 Supported by Super I/O (W83627DHG) on carrier board 3 0x2F8 Yes
2.8. SEMA Board Controller
z Type: ADLINK Smart Embedded Management Agent (SEMA)
z Functions:
• Voltage/Current monitoring
• Power sequence debug support
• AT/ATX mode control
• Logistics and forensic information
• Flat panel control
• General purpose I2C
• Failsafe BIOS (dual BIOS )
• Watchdog timer and fan control
2.9. Debug
z 40-pin flat cable connector to be used with DB-40 debug module
Supports: BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
z MIPI60 60-pin header for debug of SoC (build option)
2.10. Trusted Platform Module (TPM)
z Chipset: Infineon (build option)
z Type: TPM 2.0
To Next Page
Loading...