ADLINK Technology cExpress-AL - Page 63

cExpress-AL
BIOS Setup 57
7.3.3. Advanced > Power Management
Feature Options Description
Power Management Info only
Enable ACPI Auto Configuration
Disabled
Enabled
Enables or Disables BIOS ACPI Auto Configuration.
Enable Hibernation
Disabled
Enabled
Enable or Disable System ability to Hibernate (OS/S4
Sleep State).
This option maybe not effective with some OS.
ACPI Sleep State
Suspend Disable
S3 (Suspend to RAM)
Select the highest ACPI sleep state the system will
enter when the SUSPEND button is pressed.
Emulation AT/ATX
Emulation AT
ATX
Select Emulation AT or ATX function.
If this option set to [Emulation AT], BIOS will report no
suspend functions to ACPI OS.
In windows XP, it will make OS show shutdown
message during system shutdown.
Lock Legacy Resources
Disabled
Enabled
Enables or Disables Lock of Legacy Resources.
LID Function
Disabled
Enabled
Enable / Disable LID Function.
ECO Mode
Disabled
Enabled
Reduces the power consumption of the system, but
after a shutdown, you have to wait at least 5 seconds
before you can restart the system.
Power Consumption Submenu Power Consumption.
7.3.3.1. Advanced > Power Management > Power Consumption
Feature Options Description
Power Consumption Info Only
Current Input Current Info Only Display Current Input Current
Current Input Power Info Only Display Current Input Power
VCORE Info Only Display VCORE Voltage
VGFX Info Only Display VGFX Voltage
VMEM Info Only Display VMEM Voltage
5VSB Info Only Display 5VSB Voltage
VIN Info Only Display VIN Voltage
5V Info Only Display 5V Voltage
3.3V Info Only Display 3.3V Voltage
3.3VSB Info Only Display 3.3VSB Voltage
7.3.4. Advanced > System Management
Feature Options Description
System Management Info Only
Version Info Only Display SEMA Module Version.