ADLINK Technology PCI-7251 - Device Installation for Windows Systems; Connector Pin Assignments; PCI-7250;51 Pin Assignment; Figure 2-3: CN1 - D Type Connector

14 Installation
2.5 Device Installation for Windows Systems
Once Windows 95/98/2000 has started, the Plug and Play func-
tions of the Windows system will find and locate the new NuDAQ/
NuIPC card. If this is the first time a NuDAQ/NuIPC card is
installed in your Windows system, you will be prompted to input
the device information source. Please refer to the “Software Instal-
lation Guide” for installation procedures for the device drivers.
2.6 Connector Pin Assignments
PCI-7250/51 Pin Assignment
The PCI-7250 card comes equipped with a 37-pin D type connec-
tor (CN1) accessible from the rear of the card. The pin assignment
of the D type connector is shown in below.
Figure 2-3: CN1 - D Type Connector
1
2
3
4
5
6
10
11
12
13
14
15
7
8
9
16
17
18
19
20
21
22
23
24
25
26
27
28
30
31
32
33
29
35
36
37
34
COM0
NC0
NO1
COM1
NC1
NO2
COM2
NC2
COM7
DI0
DI1
DI2
DI3
DI4
DI5
NO7
DI6
DI7
NO3
COM3
NC3
NO4
COM4
NO5
COM5
NO6
COM6
N/C
NO0
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7