LEC-MTK-i1200 User’s Guide SGET SMARC Rev 2.1
Page 18 copyright © 2023 ADLINK Technology Inc.
4. Pinout and Signal Descriptions
4.1 Pin Summary
The below table is a comprehensible list of all signal pins on the MXM 3 connector in the standard specification SMARC 2.1.
Signals not supported on LEC-MTK-i1200 are strikethrough STRIKETHROUGH
Top Side
P1 P74 P75
Key
P156
Bottom Side
S156 S76 S75
Key
S1
Figure 2 – Module top/botom side pin numbering