Need help?Do you have a question about the ADLINK Technology VPX3-TL BIOS and is the answer not in the manual?
General| Form Factor | VPX |
|---|---|
| Chipset | Intel® CM246 |
| Storage | SATA SSD |
| Operating Temperature | -40°C to +85°C |
| Backplane Interface | VPX (VITA 46) |
Explains how to enter and use the BIOS setup utility.
Describes the layout and navigation of the BIOS menu bar.
Details the formatting and color conventions used in the setup menu.
Displays essential BIOS vendor and version details for system identification.
Provides detailed hardware and system configuration information.
Allows users to view and configure the system's current date and time.
Shows runtime statistics and board-specific identification details.
Configures various CPU features, performance, and virtualization settings.
Manages CPU and GT power states, performance tuning, and energy efficiency.
Adjusts settings for Intel's Time Coordinated Computing (TCC) for real-time performance.
Controls ACPI auto configuration and power-up modes for system power management.
Provides access to system management features like SEMA and error logs.
Configures thermal settings for CPU and platform to manage heat and prevent overheating.
Sets up watchdog timers to automatically reset the system under specific conditions.
Configures settings for the Super I/O chip, including serial ports.
Manages VPX-specific configurations, including GPIO and power management.
Configures USB controller settings, legacy support, and transfer timeouts.
Sets the primary display output for the Intel Graphics Controller.
Enables and configures serial port console redirection for remote management.
Configures PXE and HTTP boot support for IPv4 and IPv6 network stacks.
Manages Trusted Platform Module (TPM) settings for enhanced system security.
Configures System Agent features like VT-d, memory, and graphics.
Manages Platform Controller Hub (PCH) I/O settings, including SATA and USB.
Manages and views system event logs for monitoring and troubleshooting.
Displays Field Replaceable Unit (FRU) information for hardware identification.
Configures network settings for the Baseboard Management Controller (BMC).
Configures ADLINK-specific IPMI settings for system management.
Configure or clear the administrator password for BIOS access control.
Configure or clear the user password for power-on and setup access.
Manage hard disk drive (HDD) passwords and security settings for data protection.
Configure Secure Boot settings to ensure system integrity during startup.
Configures boot order, timeout, and fast boot options for system startup.
Select options to save changes, discard changes, or exit the BIOS setup utility.
To Next Page
