ADLINK Technology VPX3-TL BIOS - Console Redirection Settings (EMS)

48
VPX3-TL BIOS
3.12.2 Console Redirection Settings (EMS)
Aptio Setup – AMI
Advanced
Out-of-Band Mgmt Port [COM0]
Terminal Type EMS [VT-UTF8]
Bits per second EMS [115200]
Flow Control EMS [None]
Data Bits EMS 8
Parity EMS None
Stop Bits EMS 1
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Out-of-Band Mgmt Port
COM0
COM1
COM2
COM3
Microsoft Windows Emergency
Management Services (EMS) allows for
remote management of a Windows Server
OS through a serial port.
Terminal Type EMS
VT100
VT100Plus
VT-UTF8
ANSI
VT-UTF8 is the preferred terminal type for
out-of-band management. The next best
choice is VT100+ and then VT100. See
above, in Console Redirection Settings page,
for more Help with Terminal
Type/Emulation.
Bits per second EMS
9600
19200
57600
115200
Selects serial port transmission speed. The
speed must be matched on the other side.
Long or noisy lines may require lower
speeds.
Flow Control EMS
None
Hardware RTS/CTS
Software Xon/Xoff
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be
sent to re-start the flow. Hardware flow
control uses two wires to send start/stop