ADLINK Technology VPX3-TL BIOS - Memory Configuration

54
VPX3-TL BIOS
4.1.1 Memory Configuration
Aptio Setup – AMI
Chipset
Memory Configuration
Memory RC Version 2.0.2.8
Memory Speed 3200 MT/s
Memory Timings (tCL-tRCD-tRP-tRAS) 22-22-22-52
Controller 0 Channel 0 Slot 0 Populated & Enabled
Size 16384 MB (DDR4)
Number of Ranks 1
Manufacturer Micron
Controller 0 Channel 0 Slot 1 Not Populated / Disabled
Controller 0 Channel 1 Slot 0 Populated & Enabled
Size 16384 MB (DDR4)
Number of Ranks 1
Manufacturer Micron ><: Select Screen
Controller 0 Channel 1 Slot 1 Not Populated / Disabled ^v: Select Item
Enter: Select
Memory Test on Warm Boot [Enabled] +/-: Change Opt.
Maximum Memory Frequency [Auto] F1: General Help
ECC Support [Enabled] F8: Previous Values
Max TOLUD [Dynamic] F9: Optimized Default
Controller 0, Channel 0 DIMM Control [Disable DIMM1] F10: Save & Exit
Controller 1, Channel 0 DIMM Control [Disable DIMM1] ESC: Exit
In-Band ECC Support [Disabled]
BIOS Item Options Description
Memory RC Version Info-only
Memory Speed Info-only
Memory Timings (tCL-
tRCD-tRP-tRAS)
Info-only
Controller X Channel X
Slot X
Info-only
Size Info-only
Number of Ranks Info-only
Manufacturer Info-only
Memory Test on Warm
Boot
Disabled
Enabled
Enable Or Disable Base Memory Test Run
on Warm Boot
Maximum Memory
Frequency
Auto Maximum Memory Frequency Selections
in Mhz.
ECC Support
Disabled
Enabled
Enable/disable DDR Ecc Support
Max TOLUD
Dynamic, 1 GB, 1.25
GB, 1.5 GB, 1.75 GB, 2
GB, 2.25 GB, 2.5 GB,
2.75 GB, 3 GB, 3.25
GB, 3.5 GB
Maximum Value of TOLUD. Dynamic
assignment would adjust TOLUD
automatically based on largest MMIO
length of installed graphic controller