ADLINK Technology VPX3-TL BIOS - CPU - Power Management Control

12
VPX3-TL BIOS
3.2.1 CPU – Power Management Control
Aptio Setup – AMI
Advanced
CPU – Power Management Control CPU – Power Management
Control Options
Boot performance mode [Turbo Performance]
Intel(R) SpeedStep(tm) [Enabled]
Race To Halt (RTH) [Enabled]
Intel(R) Speed Shift Technology [Enabled]
Per Core P State OS control mode [Enabled]
HwP Autonomous Per Core P State [Enabled]
HwP Autonomous EPP Grouping [Enabled]
EPB override over PECI [Disabled]
HwP Fast MSR Support [Enabled]
HDC Control [Enabled]
Turbo Mode [Disabled]
> View/Configure Turbo Options
> Config TDP Configurations
> CPU VR Settings
Platform PL1 Enable [Enabled]
Platform PL1 Power 50000
Platform PL1 Time Window [0]
Platform PL2 Enable [Enabled]
Platform PL2 Power 55000 ><: Select Screen
Power Limit 4 Override [Disabled] ^v: Select Item
C states [Disabled] Enter: Select
Thermal Monitor [Enabled] +/-: Change Opt.
Interrupt Redirection Mode Selection [Fixed Priority] F1: General Help
Timed MWAIT [Disabled] F8: Previous Values
> Custom P-state Table F9: Optimized Default
Energy Performance Gain [Disabled] F10: Save & Exit
EPG DIMM Idd3N ESC: Exit
EPG DIMM Idd3P
> Power Limit 3 Settings
> CPU Lock Configuration
BIOS Item Options Description
Boot performance mode Max Battery
Max Non-Turbo
Performance
Turbo Performance
Select the performance state that the BIOS
will set starting from reset vector.
Intel(R) SpeedStep(tm) Enabled
Disabled
Allows more than two frequency ranges to
be supported.
Race To Halt (RTH) Enabled
Disabled
Enable/Disable Race To Halt feature. RTH
will dynamically increase CPU frequency in
order to enter pkg C-State faster to reduce
overall power. (RTH is controlled through