8
VPX3-TL BIOS
2.4 Board Information
Aptio Setup – AMI
Main
Board Information
Serial Number N/A
Manufacturing Date N/A
Last Repair Date N/A
MAC ID
Runtime Statistics
N/A
Total Runtime 12h 51m
Current Runtime 0h 01m 29s
Power Cycles 98
Boot Cycles 198
Boot Reason Software-reset
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Serial Number Info-only. Display board’s serial number.
Manufacturing Date Info-only. Display manufacturing date.
Last Repair Date Info-only. Display Last Repair Date.
MAC ID Info-only. Shows onboard Ethernet’s MAC ID.
Total Runtime Info-only. The returned value specifies the total
time in minutes the system is running
in S0 state.
Current Runtime Info-only. The returned value specifies the time in
seconds the system is running in S0
state.
This counter is cleared when the
system is removed from the external
power supply.
Power Cycle Info-only. The returned value specifies the
number of times the external power
supply has been shut down.
Boot Cycles Info-only. The boot cycle is increased after a HW
or SW reset or after a successful power-
up.
Boot Reason Info-only. The boot reason is the event which
causes the reboot of the system.
To Next Page
Loading...
