ADLINK Technology VPX3-TL BIOS - 4.2 PCH-IO Configuration

58
VPX3-TL BIOS
4.2 PCH-IO Configuration
Aptio Setup – AMI
Chipset
PCH-IO Configuration
> SATA And RST Configuration
> USB Configuration
> Security Configuration
> HD Audio Configuration
> SerialIo Configuration
> Pch Thermal Throttling Control
> TSN GBE Configuration
Port 80h Redirection [LPC Bus]
Enhance Port 80h LPC Decoding [Enabled]
Enable TCO Timer [Enabled]
Enable Timed GPIO0 [Disabled] ><: Select Screen
Enable Timed GPIO1 [Disabled] ^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
> SATA And RST
Configuration
Submenu
> USB Configuration Submenu
> Security Configuration Submenu
> HD Audio Configuration Submenu
> SerialIo Configuration Submenu
> Pch Thermal Throttling
Control
Submenu
> TSN GBE Configuration Submenu
Port 80h Redirection
LPC Bus
PCIE Bus
Control where the Port 80h cycles are
sent.
Enhance Port 80h LPC
Decoding
Disabled
Enabled
Support the word/dword decoding of port
80h behind LPC
Enable TCO Timer
Disabled
Enabled
Enable/Disable TCO timer. When disabled,
it disables PCH ACPI timer, stops TCO
timer, and ACPI WDAT table will not be
published.