ADLINK Technology VPX3-TL BIOS - 3.4 Power Management

29
VPX3-TL BIOS
3.4 Power Management
Aptio Setup – AMI
Advanced
Power Management
Enable ACPI Auto Configuration [Disabled]
Power-Up Mode [Turn On]
ATTENTION: The Power-Up Mode only
has effect,
if the module is in ATX-Mode.
> Power Consumption
><: Select Screen
^v: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Default
F10: Save & Exit
ESC: Exit
BIOS Item Options Description
Enable ACPI Auto
Configuration
Enabled
Disabled
Enables or Disables BIOS ACPI Auto
Configuration.
Power-Up Mode Turn On
Remain Off
Turn On:
The machine starts automatically when
the power supply is turned on.
Remain Off:
To start the machine the power button has
to be pressed.
Power Consumption Submenu